Thermal Shock Chambers (TSV, TSH, TSD Series)

Russells Technical Products offers a wide range of standard and custom thermal shock and thermal cycling chambers. Thermal shock or thermal cycling allows for the rapid transfer of products between temperature extremes, or the alternating heating and cooling of test articles in cyclical manner. Our direct transfer method between two independently controlled hot and cold chambers is an economical way to achieve rapid temperature transition or thermal cycling for industries including battery, automotive, aerospace, materials and composites, and more.

About Thermal Shock Chambers

Thermal shock chambers were originally developed to detect product defects and production flaws in electronics manufacturing. Designed to rapidly transfer products between hot and cold temperature zones, our thermal shock test chambers are available in vertical or horizontal configurations. Widely used in a variety of industries including automotive, aerospace, battery, electronics, and more.

View Thermal Shock Chamber Spec Sheet

Features

  • Chamber liners heliarc welded and dye checked brushed 300 stainless steel.
  • Fiberglass insulation, urethane foam insulation
  • Welded structural steel frame
  • Service panels removable with 1/4 turn fasteners
  • Chamber fan motors externally located
  • Dual silicone door gaskets
  • Cold chamber drain
  • Microprocessor temperature programmer controller
  • TSV Series Two Zone (hot/cold) Vertical – direct hot/cold transfer
  • TSH Series Three Zone (hot/ambient/cold) Horizontal – direct hot/cold transfer with selectable ambient temperature dwell required for some MIL-STD’s
  • TSD Series Double Duty (hot/cold/hot) – direct hot/cold transfer with additional hot zone and second transfer carriage effectively doubles throughput capacity for high volume production
  • Sizes from 30 l (1 cu ft) to 450 l (16 cu ft) capacity
  • Cold zone temperatures to -100°F/-73°C
  • Hot zone to 392°F/200°C
  • Automatic transfer of test specimens between zones
  • Temperature range for mechanical refrigeration:
    • -100°F/-73°C to 392°F/200°C
  • Temperature range for liquid nitrogen refrigeration:
    • -301°F/-185°C to 392°F/200°C
  • ESS Chambers
  • Cascade low temperature to -100°F/-73°C
  • Single stage to -4°F/-20°C
  • High temperature to 356°F/180°C
  • Transition rates to 54° F/minute (30°C/ minute)
  • Humidity from 20% to 95% RH
  • Available with passive or power product fixturing
  • Cart based or backplane style
  • Can be equipped with battery testing safety features according to EUCAR hazard safety level

Optional

  • Traveling access port to transfer basket
  • Transfer basket shelves or fixtures
  • Viewing windows
  • Refrigeration gauges
  • Refrigeration sound deadening package
  • Remote refrigeration systems
  • LN2/CO2 boost cooling
  • Air cooled condenser
  • Dry air purge system
  • Running time meter
  • Electrical disconnect switch
  • RussellsOne controller
  • Product safeguard redundant over/under temperature limit
  • Circular or electronic chart recorders
  • Computer communications, networking, data‐logging software
  • Free standing remote instrument console

Cooling

  • Low or zero ozone depletion refrigerants
  • Cascade or liquid nitrogen cooling
  • Energy saving refrigeration bypass capacity control
  • Low stage desuperheater
  • Oil pressure switches
  • Compressor suction and discharge pressure switches
  • Water cooled condenser on mechanical refrigeration models
  • Vapor tank and condenser ASME certified
  • Compressor overload protection
  • High-stage compressor crankcase heater
  • Compressor head fans
  • Low-stage oil separator
  • All piping joints silfos or silver soldered
  • Stainless steel compressor condensate parts

Electrical

  • All wiring meets NEC standards
  • 120v control circuit transformer
  • Fully enclosed electrical panel
  • All circuits fuse of the circuit breaker protected
  • Full system function switches with system status pilot lights
  • Incandescent interior lighting
  • All wiring numbered or color coded
  • High temperature limit safety
  • Master heating circuit contactor
  • Air circulator/heater interlock
  • Balanced load on three phase power
  • Chamber door interlocks